Presentations Archive

Cleaning and Testing in Metallic Filtration Applications DCU

- Sue Reynolds, Carolina Filters Inc.

The Blasch VectorWall. Reaction Furnace Volume Management System – Combustion Efficiency Reimagined DCU

- Tim Connors, Blasch Precision Ceramics

Better DCU Performance through Smarter Insulation Design DCU

- John Williams, Aspen Aerogels

The Two Biggest Challenges on Coke Drum Reliability facing the Industry DCU

- Dr. Mahmod Samman, Houston Engineering Solutions, LLC

DeltaValve Services and Aftermarket Support DCU

- Glenn Mryglod, CIRCOR | DeltaValve

Isolation Valves for Delayed Coker Service DCU

- Rick Torres, CIRCOR|DeltaValve

Intero Integrity Services Furnace Inspection DCU

- Cornel Coetzee, Intero Integrity Services US LLC

Anti-Coking Solution for Fired Heaters in the Delayed Coker DCU

- Sanjay Lodha, Tubacoat

Stellite 720 and Delayed Coker Fired Heater Return Bends DCU

- Benjamin Goodly, Kennametal

Coke Drum Bulging Reduction using Staggered Seam Design DCU

- Dr. Mahmod Samman, Houston Engineering Solutions, LLC

Case History: Sudden Drop and Tilt of an Operating Coke Drum DCU

- Bobby Wright, Becht Engineering with a US Operating Company & Dave Dewes, Becht Engineering with a US Operating Company

The Role of Solvent De-Asphalting (SDA) in Refining DCU

- Sim Romero, Becht Engineering

The Equilon Refinery Coking Plant Accident, Puget Sound WA, 25 November 1998 DCU

- Jim Thomson, Safety in Engineering

Best Practice Thermal Insulation for DCU Performance & Lifespan DCU

- Richard Schmidt, Aspen Aerogels

Maintenance for Isolation Lift Plug and 4-Way Switch Plug Valves for Delayed Coker Unit DCU

- Iker Azurmendi, AMPO POYAM VALVES

Online Monitoring and Life Extension of Coke Drums DCU

- Vipul Gupta, ONGC MRPL - Mangalore

Extending the Life of Your Mechanical Coker Bucket: Inspections and Maintenance Based on Operation Cycles DCU

- Shane Toncrey, Anvil Attachments & Mark Laughlin, Kone Cranes

DCU Commissioning and Start-Up – Key Considerations DCU

- Mitchell Moloney, Resid Upgrading Specialist and Engineering Consultant, PE

End to End Solution for Coke Drum Repair DCU

- Nilesh T. Shah, Larsen & Toubro Ltd.

Failures in Coke Drum Overhead Piping of Delayed Coker Unit DCU

- Sanal S., BPCL - Kochi Refinery

Seven Ruhrpumpen Coke Cutting Systems for India DCU

- Dr. Wolfgang Paul, Ruhrpumpen Group

An Efficient and Cost Effective Advanced Coating Solution for Tubular Products in Extreme Refinery and Petrochemical Applications DCU

- Shabareesh Nair, Tubacex Group

Get the Most from Your Coker Heaters DCU

- Dr. Amarvir Chilka, Furnace Improvement Services Inc.

Coking and Fouling on DCUs – Locations and Solutions DCU

- Mitchell Moloney, Resid Upgrading Specialist and Engineering Consultant, PE

Delayed Coker Feed Configuration and Technology Review DCU

- , CIRCOR | DeltaValve & , Reliance Industries Ltd.

The Revolution in Coke Drum Software DCU

- Christian Ljungman, Tricom Scan

Reliability Ranking and Life Extension of Coke Drums DCU

- Bobby Wright, Becht Engineering

Next Generation Delayed Coker Vessel Repair Technologies DCU

- Pedro Amador, AZZ WSI B.V. & Yelena Rojas Yoris, AZZ WSI B.V.

Closed Coke Slurry System / Start Up Impressions from LOTOS DCU

- Ralf Gast, TRIPLAN Technology & Adrian Szkudlarski, LOTOS

IMO 2020: Price Directions for Refining Products DCUFCCU

- Esa Ramasamy, S&P Global Platts

Utilization of FCC E-Cat Flushing to Control Metal Contamination and/or in Emergency Situations Caused by Cyclone Failure FCCU

- Florin Enache, Petrotel Lukoil

Actuation and Control Systems for Petrochemical Process Valves: Best Practice and New Trends DCUFCCU

- Alberto Pedrini, IMI Remosa

Development on Catalytic Deactivation Study in Commercial RFCC Catalysts FCCU

- Abdulmajeed Al Katheeri, ADNOC Refining, Research Centre Division

Preventative Maintenance and Turnarounds FCCU

- Roberto Cervellera, TapcoEnpro

Delayed Coker Feed Configuration and Technology Review DCU

- Stefan Jansen, CIRCOR | DeltaValve

Non-operator Tower of the Coker – Interlock and Automization DCU

- Guenter Breuer, BP Gelsenkirchen & Dr. Asli Nau, BP Gelsenkirchen

Bottom of the Barrel Conversions: What Does the Future Hold? DCUFCCU

- Nicola Knight, KBC (a Yokogawa Company)

Life Cycle of Delayed Coker Heater Tubes – An Experience DCU

- Sujal Surendran, Reliance Industries Ltd.

Coke Drum Repair Experiences DCU

- Anand C. Haridas, Reliance Industries Limited & Yelena Rojas, AZZ WSI

An Approach to Engineered Temporary Revamps FCCU

- Massimo Capra, Aggreko

FCCU Revamps – Challenges, Opportunities, and Lessons Learned FCCU

- Subhash Singhal , KNPC & Ahmed Al-Harbi, KNPC

Optimizing crude desalters to ensure optimum FCCU and DCU performance DCUFCCU

- Andrew Shaw, Tracerco Ltd.

Panaflow HT: Measure at extreme temperatures and reduce your expenses on shut downs, maintenance, and calibration DCU

- Theodorus Bertels, Baker Hughes, a GE Company

Lift and turn metal seated plug valve reliability issues and resolution DCU

- Dr. Matthias Ihlow, MIAM

The Benefits and Challenges of Filter Cleaning in FCC and Chemical Process Applications FCCU

- Sue L. Reynolds, Carolina Filters Inc.

Carbon Utilization and Petrochemical Integration: Capturing value via residue to chemicals projects RHU

- Sophie Babusiaux, Axens North America

Valve Selection Criteria to Minimize Downtime and Increase Productivity RHU

- David Donne, SchuF-Armaturen und Apparatebau GmbH, GERMANY

Residue Hydrocracking Purge Systems RHU

- Jon Isley, Fluor

Western Canadian Residue Hydrocracking RHU

- Jon Isley, Fluor

The Benefits and Challenges of Filter Cleaning & Testing in rHCU Applications RHU

- Sue L. Reynolds, Carolina Filters Inc.

History, Stories and Lessons Learned from Resid Hydrocracking Development RHU

- Rick Manner, Refining Community & Joe McLean, Refining Community

Typical Electric Heater Applications: Maintenance and Troubleshooting RHU

- Patrick Bartell, Valin

Residue Hydrocracking Solutions for Refinery Sustainability RHU

- Dan Gillis, Chevron Lummus Global

Catalytic Solutions to Overcome IMO Challenges FCCU

- Baha Eren, BASF

ELS Emergency Coker Shutdown – Tarry Drum Prevention – Lessons Learned DCU

- Justine Arnold, Chevron El Segundo

Addressing Increased Fouling Rates in Delayed Coker Heaters – A Case Study of Identifying the Factors Behind Increased Fouling Rates DCU

- Michael Kimbrell, Becht Engineering &

Chevron Coke Drum Inlet Transition Spool DCU

- Dale Wilborn, Chevron El Segundo & Justin Reeves, Chevron El Segundo

Costly Lessons Learned from Inspection Pitfalls of Coke Drums DCU

- Dr. Mahmod Samman, Houston Engineering Solutions, LLC

Chalmette Coker 1 Start Up and Coke Drum Unheading Project DCU

- Marie Wright, PBF Energy & Robert Mosley, PBF Energy & Alex Tajonar, PBF Energy

Validating the Performance of MOGAS’ Delayed Coker Switch Valve DCU

- Al Anderson, MOGAS

An Optimal Inspection Strategy for Coke Drums DCU

- Steven Garcia, Ameriscan LLC

Impedance: The Hassle-Free Pipe Heating Solution RHU

- John Brune, Indeeco & Mark Cornwell, Indeeco

Equipment to Improve the Safety and Reliability in FCC Units FCCU

- Andrea Pusceddu, IMI Critical Engineering

Streamlining the FCC Shutdown Process FCCU

- Sjoerd Ypma, Refined Technologies EU B.V.

Eliminating Shutdown Water Flushing on Large Process Units DCU

- Daryl Crandall, Refined Technologies EU B.V.

Revamping Existing Units to Increase Rates, Handle Lighter Feedstocks and other Problems FCCU

- Christopher Dean, CatCracking.com

It’s a FCCU, What Could Go Wrong? (and what could go right?) FCCU

- Discussion Group Facilitator & Richard Quinnette, Independent Consultant

Coke Drum Damage Lesson Learned DCU

- Sarah Whitaker, ExxonMobil & David Gibson, ExxonMobil

P9Mod : coke resistant tubes/pipes developed by Vallourec for refinery furnaces DCUFCCURHU

- Olivier Hamart, VALLOUREC & Javier Piron, VALLOUREC

Bottom of the Barrel Conversion – What does the Future Hold? DCUFCCURHU

- Mel Larson, KBC ( a Yokogawa company)

Radiometric levels on delayed cokers – lessons learned from a recent startup DCU

- David Williams, Berthold Technologies

Importance of Radiometric Density Measurements on Resid Hydrocracker Reactors RHU

- David Williams, Berthold Technologies

Troubleshooting Catalyst Losses Workshop FCCU

- Jason Goodson, BASF & Joe McLean, Astron Inc.

Next Generation Delayed Coker Vessel Repair Technologies DCU

- Michael Sofferin, CITGO Lake Charles & Pedro Amador, AZZ WSI & Peter Sanders, AZZ WSI

TUPRAS Completes their Residuum Upgrading Project (RUP) at Izmit Refinery in Turkey DCU

- Onur Aka, TUPRAS

SRU Thermal Reactor Chemistry & Design SRU

- Roelof Ten Hooven, Duiker Combustion Engineers

Bulging Assessment of Coke Drums: a state of the art review DCU

- Dr. Mahmod Samman, Houston Engineering Solutions

Octane Boost and Capacity Increase for Hydrotreated Naphtha FCCU

- Brant Aggus, INVISTA

From Art to Science: Quantifying Infrared Temperature Corrections DCUFCCURHU

- Nagy Wassef, Quest Integrity

Preparing Amine, Acid Gas and Sour Water vessels for safe entry with the vapor-phase application of an organic solvent and pyrophoric oxidizing agent SRU

- Armand Abay, Refined Technologies

Automating Catalyst Withdrawal for Improved Safety FCCU

- Kate Hovey, Johnson Matthey

Maximizing Propylene & Isobutylene from the FCC FCCU

- Rafael Gonzalez Sanchez, GRACE

Next Generation Delayed Coker Vessel Repair Technologies DCU

- Pedro Amador, AZZ

An Approach to Temporary Revamps SRU

- Massimo Capra, Aggreko

Coker Valves Interlock Improvement Project at Suncor Energy Inc. DCU

- Dom Toledo, Suncor Energy Inc.

Enrich your SRU! How to increase Sulphur processing capacity of an existing plant SRU

- Alessandro Buonomini, KT Engineering

A Case Study: Avoiding Modification Costs and Downtime when Inspecting Furnace Heater Coils with oversized Common Headers DCU

- Mark Slaughter, Intero Integrity (formerly a.Hak Industrial Systems)

Market Disruptor: IMO 2020 DCUSRU

- Eswaran Ramasamy, S&P Global Platts

Acid Gas Removal & Sulphur Recovery in Kuwait SRU

- Mahdi Ashkanani, Kuwait Oil Company

Preventative Maintenance “Success Stories” through APC at Statoil Mongstadt and Petron Philipines DCU

- Markus Gandelheidt, IMI Z&J

FCC Flue Gas Treatment by implementing BELCO Wet Scrubbing Technology FCCU

- Florin Enache, Lukoil Petrotel & John Bothsa, Dupont Clean Technologies & Scott Eagleson, BELCO Technologies Corp.

Optimized Performance with Predictive Maintenance in Delayed Coker Units DCU

- Raimar Hellwig, Metso Flow Control

Performance of Weld Overlay Repaired Coke Drums DCU

- Dr. Mahmod Samman, Houston Engineering Solutions, LLC

Delayed Coking Availability Improving by Means of Ceramic Coatings DCU

- Francisco Fernandez, Tubacoat / Tubacex Group

Electronic Turnaround Optimization Platform – eTOP DCUFCCUSRU

- Stefan Krebich, OMV Refining & Marketing GmbH & Rene Leitner, OMV Refining & Marketing GmbH

WSA Technology – A Competitive Solution for Refinery Sulfur Management SRU

- Livia Sierra Llorens , Haldor Topsoe, Inc.

The Pursuit of Low Emissions: the Development of Catalytic Options for High Sulfur Recovery SRU

- Marco van Son, Jacobs Comprimo Sulfur Solutions

FCC Valve Stuffing Box: From Design Best Practice to Field Troubleshooting FCCU

- Andrea Pusceddu, IMI Remosa

Upgrading Existing Delayed Cokers with Ruhrpumpen Remote Cutting Technology DCU

- Daniel Lopez, Ruhrpumpen

Maximize Performance of your FCC Unit using Unconventional Solutions FCCU

- Evae Andersson, Alfa Laval

Incident Investigation Results – Piping Failure in HCGO Circuit DCUFCCUSRU

- Sed Freeman, Lyondellbasell Houston Refinery & Don Tran, Lyondellbasell Houston Refinery

Online, Non-intrusive Trouble Shooting and Process Characterization of FCCU’s using Gamma Ray and Tracer Technology FCCU

- Andrew Shaw, Tracerco Ltd.

Comprehensive Life Assessment of a Coke Drum DCU

- Dr. Marian Soare, Nuclear NDT Research & Services & Sorin Minea, Nuclear NDT Research & Services

ClearSign Combustion’s DuplexTM Advanced Combustion Technology FCCU

- Stephen Sock, ClearSign Combustion Corporation

Designing Internals to Minimize Fouling in the Bottom of the FCC Main Fractionators FCCU

- Dennis Schmude, Koch-Glitsch, LP

Innovative DTL Technology Allows Refinery to Convert Light Olefins in the Fuel Gas to Stable High-Octane Gasoline FCCU

- Brant Aggus, Koch-Glitsch, LP

Interactive DCU Modeling Workshop using PetroSim DCU

- Sim Romero, KBC (Yokogawa) & Maria Aldescu, KBC (Yokogawa)

Effects of MARPOL VI on Petcoke, Distillates, Resids, Vacuum Tower Bottoms and the Light-Heavy Spread DCUFCCUSRU

- Edward Arnold, Argus Consulting

Hurricane Harvey: Shutdown and Startup SRU

- Ron Pitman, Motiva Port Arthur

Oxygen Enrichment at the Sulphur Recovery Unit SRU

- Murat Kolbasi, TUPRAS

Is Your Plant Cloud-Ready? FCCU

- Mel Larson, KBC Adanced Technologies Inc

Simulation, Turnarounds, and FCC Operational Cycles FCCU

- Sam Clark, CPFD Software LLC

Improvements since the 1998 Equilon Puget Sound Refinery Coke Drum Incident DCU

- Tom Meek, Shell Puget Sound & Brent Sattler, Valero

Efficiently Reducing SO2 Emissions on a Smaller Plot: A Case Study at Ta-Lin Refinery, Taiwan SRU

- Curt Hassler, Dupont Clean Technologies

Importance of Amine Systems H2S and CO2 Recovery Efficiency to Avoid Fouling and Elevated Corrosion Rates SRU

- Umesh Mather, Aggreko Process Services EMEA

Using SWSPlus for Sulfur Capacity Addition SRU

- Martin Taylor, Bechtel Hydrocarbon Technology Solutions

Use of a Light Oil Cycle (LCO) Enhancer to Improve De-inventory and Decontamination of a FCC Main Fractionator FCCU

- Zach Stewart, DeltaTech Services

Coker Heater Performance Improvements DCU

- Donald Tran, Lyondellbasell Refining & Ashutosh Garg, Furnace Improvements

Increasing FCC Unit Performance with Catalysts from Boron Based Technology (BBT) FCCU

- Tiffany Clark, BASF

Moving to above-ground Sx Sealing SRU

- Stefaan Gouhie, CSI Ametek

Understanding Installation of Steam Tracing for Long-Term Application Success SRU

- Tom Perry, QMax Industries

Characteristics of Sour Flare Gas Streams that Impact H2S Treatment Technologies

- Darshan Sachde, Trimeric Corporation

Modern Coke Drum Design DCU

- Steve Beeston, Amec Foster Wheeler

Three Stream Online Analyzer Installation in HFA Unit FCCU

- Miklos Gal, MOL PLC.

FCC Unit Feedstock Flexibility in Danube Refinery FCCU

- Tamas Kasza, MOL Plc. & Tamas Nemeth, MOL Plc.

Slovnaft’s FCC Contribution to the MOL Group’s 2030 Strategy FCCU

- Norbert Kovac, Slovnaft & Dominik Gibala, Slovnaft

Continuous Level Measurement on Coke Drum DCU

- Miklos Gal, MOL PLC.

Unconventional SRU Capacity Debottlenecking via ATS Production SRU

- Jozef Halas, SLOVNAFT, a member of the MOL Group

Root Cause Analysis and Successful Modifications to Eliminate Hot Spots in SRU at MOL’s Danube Refinery SRU

- Akos Nemeth, MOL DS Production

IMI Z&J: State of the Art Delayed Coking Unheading Technology DCU

- Reiner Mehr, IMI Z&J

Overcoming Operational Problems in a Claus Tail Gas Unit SRU

- Claus Brostrom Nielsen, Haldor Topsoe A/S

Refractory Selection for SRUs SRU

- Giuseppe Pettenati, HarbisonWalker International

Reducing Octane Loss – Solutions for FCC Gasoline Post-Treatment Services FCCU

- Claus Brostrom Nielsen, Haldor Topsoe A/S

Refractory Selection for FCCUs FCCU

- Giuseppe Pettenati, HarbisonWalker International &

BLAC Inc. New Division for FCCU / RFCCU Valve Systems FCCU

- Philip Black, BLAC INC.

WHY SIL? – Use of SIL in the Design of Hydraulic Valve Actuators for FCCU and DCU DCUFCCU

- Neal Cammy, BLAC INC.

Delayed Coker Blowdown System Water Reuse DCU

- Mitchell Moloney, ExxonMobil Petroleum & Chemical B.V.B.A

Opening Process Equipment (OPE) – ExxonMobil Best Practice DCUFCCUSRU

- Mitchell Moloney, ExxonMobil Petroleum & Chemical B.V.B.A

Licensing an EPC Project – Case Study on a Fully Modularized SRU and AGE Package for Gas Field in Egypt SRU

- Alessandro Buonomini, KT - Kenetic Technology S.p.A & Armando Costantini, KT - Kenetic Technology S.p.A

Welded Plate Bloc-Heat Exchangers in Amine Systems and Sour Water Strippers SRU

- Roy Niekerk, Kelvion

SOx Additive Effects on FCC Emissions FCCU

- Miray Genç, TUPRAS

A New Automatic Bottom Unheading Valve: Combining the Advantages of Existing Classical Concepts in an Innovative Way DCU

- Wolfgang Zingsem, Paul Wurth Oil & Gas Division

Nuclear Level Measurement in DCU – Challenges, Solutions, and Interpretations DCU

- Dr. Jan Sielk, Berthold Technologies GmbH & Co KG

A Different Approach to Arrest Through Wall Cracks on a Coke Drum using Weld Overlay DCU

- Yurik Leon, Weld O Latinoamerica

Center Feed: Maximizing Coke Drum Life DCU

- Ruben Lah, DeltaValve LLC

Closed Coke Slurry System: An Advanced Coke Handling Process DCU

- Werner Vermeire, Triplan Technologies

Case Study – Venezuelan Coker Unit Emergency Shutdown: Preparing for Vessel Entry DCU

- Martha Smith, ZymeFlow Decon Technology

Fast quench problems and how they damage coke drums DCU

- Richard Boswell, Stress Engineering Services

Coker Job Shadowing DCU

- Steve Mason, LyondellBasell & John Rosacker, Sinclair

The Different Types and Causes of Coke Drum Bulging DCU

- Dr. Mahmod Samman, Houston Engineering Solutions, LLC

Modernization of Romanian Cokers, Executed in a Major Revamp at OMV Petrom Refinery DCU

- Vera Predescu, OMV Petrom Refinery & Dr. Wolfgang Paul, Ruhrpumpen GmbH

Field Modification of DCU Support Skirt-to-Vessel Attachment Weld Geometry DCU

- Pedro Amador, AZZ WSI

FCC Reactor Overhead Line Vapor Isolation Valve FCCU

- Freddie Gines, IMI Z&J - Houston TX

WSA Technology – A Competitive Solution for Refinery Sulfur Management SRU

- Livia Sierra Llorens, Haldor Topsoe, Inc.

Efficiently Reducing SO2 Emissions on a Smaller Plot: A Case Study at Ta-Lin Refinery, Taiwan SRU

- Yves Herssens, Dupont Clean Technologies

Upgrading a FCC Main Fractionator to Improve Operational Reliability and Flexibility FCCU

- Giuseppe Mosca, Sulzer Chemtech Italia srl

Up or Down? Understanding Nuclear Gauges on Delayed Cokers DCU

- David Williams, VEGA Americas

Handling Delayed Coker Disturbances with APC DCU

- Arnaud Nougues, Yokogawa Europe Solutions B.V.

Reliability – A Path to Changing Unplanned Losses into Production Gains DCUFCCU

- John Mleczewski, Linde Americas

Fatigue Life / Reliability Consideration during Field Repair of Coke Drum / Piping DCU

- Reliance Industries Ltd. , Umakanthan Anand & Amec Foster Wheeler , Tej Chadda

The Most Likely Futures for US Refining DCUFCCU

- Edward Arnold, Argus Media

Chevron Coker Safety and Reliability DCU

Successful Reversal of Deterioration in an Old Set of Coke Drums DCU

- Pierre Du Plessis, Suncor Energy (Retired) & Dr. Mahmod Samman, Houston Engineering Solutions, LLC

Modernizing a Vintage CatCracker FCCU

- Donald Leigh, HollyFrontier El Dorado

Level Measurement in DCU and FCC Fractionators – Challenges and Solutions DCUFCCU

- Dr. Jan Sielk, Berthold Technologies GmbH & Co KG

Case Study – Venezuelan Coker Unit Emergency Shutdown: Preparing for Vessel Entry DCU

- Steve Matza PhD, ZymeFlow Decon Technology

A Clean Future for Coke Handling: KT experience in a grass root project and a revamping case study DCU

- Cristina Guazzotti, KT Kenetics Technology SpA

Strategies for Managing Contaminant Metals in the FCC Unit FCCU

- Rebecca Kuo, BASF

FCC Naphtha Post-treatment FCCU

- Henrick Rasmussen, Haldor Topse Inc.

Maximize LCO in FCC Main Fractionation Without Corroding, Plugging or Coking the Internals FCCU

- Celso Pajaro, Sulzer Chemtech

Preserving FCC Throughput: Overcoming System Cooling Limits by Alternative Approach FCCU

- Michael Karlin, Aggreko Process Services

Capturing Refinery Operational Value Through IIoT – The Industrial Internet of Things FCCU

- Douglas White, Emerson Process Management

DCU Furnace Troubleshooting: Furnace High Tube Metal Temperature DCU

- C.K. Sinha, IOCL - Digboi Refinery

Closed Coke Slurry System DCU

- Sunil Kulkarni, TRIPLAN Technology GmbH & Werner Vermeire, TRIPLAN Technology GmbH

Amec Foster Wheeler Heater Best Practices DCU

- Pat Bernhagen, Amec Foster Wheeler

Keynote at RefComm® Mumbai – Decoking in India DCU

- Dr. Wolfgang Paul, RuhrPumpen

Using Simulation as a Tool for Coker Troubleshooting and Predictions – the KBC approach DCU

- Ranjit Bhise, KBC Advanced Technology Private Limited

Coke Drum Flow Distributions DCU

- Julian Bedoya, Stress Engineering Services Inc. & Jeyam Kumar, DeltaValve

Troubleshooting in Delayed Coker Unit Inspection Experience DCU

- Vipul Gupta, MRPL

Remaining Life Assessment of Coker Heater Tubes DCU

- Atul Ganpatye, Stress Engineering Services, Inc.

Coke Cutting System for Cokers in India DCU

- Dr. Wofgang Paul, RuhrPumpen

Handling Power and Steam Outage in DCU – Recent Experiences DCU

- G.D. Vinothkanna, MRPL

Improving Delayed Coker Heater Run Length DCU

- Ken Catala, CB&I

DCU Revamp for Capacity and Efficiency Increase DCU

- Hardeep Sigh, Bharat Oman Refining Ltd. Bina Refinery

Mechanical Coker Buckets: Inspection, Repair, & Rebuilding DCU

- Jon Craft, Anvil Attachments, LLC & Anil Sutar, WMI Konecranes India, Ltd.

Cost Conscious Coker Unheading Valve Hydraulic System Design DCU

- Neal Cammy, Blac Inc.

Support Network Critical to Coker Crane Success DCU

- Mark Laughlin, Konecranes America & Anil Sutar, WMI Konecranes India, Ltd.

DCU Furnace On-Line Spalling DCU

- Richard Heniford, Bechtel Hydrocarbon Technology Solutions, Inc. & Tony Hudson, Bechtel Hydrocarbon Technology Solutions, Inc.

Coker Furnace Run Length DCU

- Niaz Mustafa, Heurtey Petrochem

The Latest Advancements in Delayed Coke Drum Inspection & Reliability Techniques DCU

- Les Harold, CIA

Lessons Learned Throughout the Use of Nuclear Transmitters on Coke Drums DCU

- David Williams, VEGA Americas

Coke Drum MOV PLC Permissive Interlock System Availability DCU

- Mitchell Moloney, ExxonMobil Research and Engineering

Pushing the Limits of FCC Gasoline Desulfurization FCCU

- George Hoekstra, Hoekstra Trading Co

FCCU Process Optimization with High-Performance Temperature Instrumentation FCCU

- Walter Tijmes, Daily Thermetrics

Extending the Creep Life of a High Temperature Refinery Reactor FCCU

- erry Wilks, CITGO Lemont

Sulfur Pits – On-Line/Off-Line Evaluation Approach SRU

- Thomas Kline, Structural Technologies

Cargo Cults and New Applications Case Study I&E

- Robert Dunlap, Valdes Engineering

Case Study – Oil-filled Transformer Pre-Failure Detection I&E

- Charlie Smith, RefiningCommunity.com

HS-FCC for propylene: Concept to Commercial Operation FCCU

- Alex Maller, Technip

Appropriate Application Level for Wireless Instrumentation: Best Practices I&E

- Thomas Garry, Emerson Process Management

Achieving Operational Excellence on a Delayed Coking: An APC Project DCU

- John Ward, Emerson Process Management

Comprehensive Re-utilization of Fine Particle Pollutants from FCC Unit FCCU

- Dr. Zheng Li & Carrie Jiang, HCpect

Coke Drum MAWP and Coke Bed Quenching Controls DCU

- Mitchel Moloney, ExxonMobil Research & Engineering

Sulfur Unit Equipment Problems and Low Silicon Carbon Steel Corrosion SRU

- Jerry Wilks, CITGO

Appropriate Application Level for Wireless Instrumentation FCCUSRU

- Thomas Garry, Emerson Process Management

SRU-TGTU Analyzer Best Practices SRU

- Randy Hauser, Ametek Process Instruments

Exploring Problems and Solutions with the Jet Pump and Associated Equipment DCUI&E

- Charlie Smith, RefiningCommunity.com & Andrew Worley, Flowserve

On-Line Process Analyzers, the Profession, the Culture, and Topical Issues I&E

- Randy Hauer, Ametek

Feed Contamination to Amine and Sour Water Stripper Units Affecting the Sulfur Recovery Process – A Domino Effect SRU

- David B. Engel, NexoSolutions

FCC AIR – Access, Inspection & Rescue FCCU

- Andrew Hodgkinson, Axess AS

Downsizing a Claus Sulfur Recovery Unit SRU

- Charles Kimantas, Bechtel & Martin Taylor, Bechtel

Sulfur Capacity Expansion SRU

- Charles Kimantas, Bechtel & Martin Taylor, Bechtel

Crude Export and the New Dynamic DCUFCCUI&ESRU

- Mel Larson, KBC

Interrupted Drum Incident: A Refiner’s Report DCU

- Frank Tracy, Phillips 66

How Enhanced Reality Technology Reduces Operational Risk and Errors DCUI&E

- Christian McDermott, Voovio

FCC Valve Maintenance FCCU

- TapcoEnpro

How to Make the Proper Slurry Pump Selection for FCCU Bottoms and Product Applications FCCU

- Lawrence Pumps

Crude Desalter Level Problems and the Nuclear Option I&E

- David Williams, Vega

Hydroprocessing Reactor Control – Keys to Long and Optimized Runs w/ High-Performance I&E

- Kevin Kirksmith, Daily Thermetrics

Coke markets increasingly volatile DCU

- Lauren Masterson, Argus Media

SRU Reaction Furnace Refractories: Solutions for Reliable Lining Service SRU

- Stephen Karns, HarbisonWalker International

Troubleshooting Catalyst Losses in the FCC Unit FCCU

- Rebecca Kuo, BASF

A Look at Gasoline Sulfur Reduction Additives in FCC Operations FCCUSRU

- Melissa Clough, BASF

Plugged Taps and Impulse Lines are no Longer an Issue for Pressure and Differential Pressure Transmitters in Dirty Applications I&E

- Stan Miller, Clearguard

An Efficient Ammonia-Based SRU Tail Gas Desulfurization Process SRU

- Stein Carlsen, Stein Carlsen – Jiangnan Environmental Technology, Inc.

Sulfur Recovery Units: Application, Products, Competition SRU

- Stephen Karns, HarbisionWalker International

Innovative Advancements in Delayed Coking Equipment DCU

- Troy Bengtzen, DeltaValve

Petroleum Coke Drum Handover and Cutting Performance: Best Practices DCU

- Steve Stewart, Savage & David Sanders, Savage

Optimizing Distillate Yields and Product Properties DCU

- Srini Srivatsan, Amec Foster Wheeler

Maximizing DCU Liquid Yield from Arabian Heavy Feedstock DCU

- Essam Al-Otaibi, SATORP

Delayed Coker: High Pressure Cutting Water Safety DCU

- Mitchell Moloney, ExxonMobil

DCU Process Control: Protecting Critical Investments & Optimizing Process Control with Advanced Temperature Measurement Systems DCU

- Walter Tijmes, Daily Thermetrics

The Three Most Common Failure Modes in Coke Drums and What to Do About Them DCU

- Dr. Mahmod Samman, Houston Engineering Solutions

Coke Cutting Systems for Delayed Cokers in Warm Areas DCU

- Dr. Wolfgang Paul, Ruhrpumpen GmbH

Specifying Coke Cutting Safety & Maintenance Technology into new Projects DCU

- Andrew Worley, Flowserve

Successful Approach to the Repair of Reinforced Concrete Support Structures in DCUs DCU

- Thomas Kline, STRUCTURAL Technologies

Coker Vessel Life Extension Repair Implementation DCU

- Pedro Amador, AZZ WSI

Reduction of Propylene Losses in Coker LPG during Turndown Throughput DCU

- Hamoud Al-Qahtani, SATORP

Reliability Improvement of Charge Pump DCU

- KV Prasad Rakoti, Gujarat Refinery, IOCL & Sunil Kanti, Gujarat Refinery, IOCL

Improving FCC Unit Performance FCCU

- Mel Larson, KBC

Naphtha Catalytic Cracking in FCC Units Past and Present FCCU

- Christopher Dean, CatCracking.com

Increasing FCC Residuum Processing with Blended LTOs Shale

- Jim Trigg, GE Water & Kris Kohl, GE Water

Quenching and Preheating Of Coke Drums: A Deep Look DCUFCCU

- Francisco Fernandez, PDVSA-INTEVEP

Strategies for Maximizing FCC Light Cycle Oil FCCUShale

- Ann Benoit, Grace Catalyst Technologies

Strategies for Mitigating Fouling in Refineries Processing LTOs Shale

- Greg Savage, Nalco Champion

Sour Water Stripping: Chevron WWT Technology DCUFCCUShale

- Scott Alvis, Optimizing Gas Treating

Fact and Fantasy in Catalyst Selection Shale

- George Hoekstra, Hoekstra Trading

Maximizing Utilization of Light Tight Oils: Economics and Technology Solutions Shale

- Mel Larson, KBC

Solutions for Maximizing Value with FCC Feeds from Opportunity Crudes FCCUShale

- Alexis Shackleford, BASF

Reducing FCC Turnaround Costs: Focus on Speed and Safety FCCU

- Brent Dell, TriStarGES

New and Old Equations Tie Together 75 Years of FCC Standpipe Experience FCCU

- Phillip Niccum, KBR

Understanding Iron Contaminates on FCC Catalysts FCCU

- Melissa Clough, BASF

Techniques to Improve Combustion Reliability at the Unit Level DCU

- Scott Reynolds, Zeeco

DCU Bolting: A Galling Prevention Case Study at Tesoro Golden Eagle DCU

- Michael Psimas, Ph.D., BlackHawk Engineered Products

Maximizing Coker Value While Processing Shale Oil DCUShale

- Richard Heniford, Bechtel

Winches and Winch Cable Safety DCU

- Andrew Worley, Flowserve & Evan Hyde, Coking.com

Girth Weld Failure Analysis in Coker Blowdown Headers DCU

- Kia Gharib, Optimum Engineering Solutions

Fracture Mechanics: Screening of Coke Drum Cracks DCU

- Dr. Mahmod Samman, Houston Engineering Solutions & Suncor Energy

Dust Suppression In Petcoke Handling Operations DCU

- Michael Lewis, Dust Control Technology

Safety Moment: Following Procedures Can Save Lives DCU

- Maurice Wilkins, Yokogawa

New Techniques in Optimizing Shale and Other Opportunity Crudes Shale

- Dr. Doug White, Emerson Process Management

Coker Safety and Reliability DCU

- Dale Wilborn, Chevron

Improving Shale Oil Crude Heater Performance Shale

- Ashutosh Garg, Furnace Improvements Services

New Inventions for Extending the Service Life of Coke Drums DCU

- Mahmod Samman PhD., P.E, Houston Engineering Solutions

Workgroup How to Select Your Next Console Operator DCUFCCU

- Jolene K. Kramer, Job Performance Systems

The Latest Advancements in Delayed Coke Drum Inspection Techniques for Improved Vessel Performance and Life Extension DCU

- Les Harold, CIA Inspection

Upgrade metalurgico de Coke para la sulfidacion asistida por naftenicos DCU

- Ing. Alvaro Valverde, YPF

Testing Catalyst Additives for Sulfur Reduction in Cat Naphtha FCCU

- María Paz Chiavarino, Axion Energy & Uriel Navarro Uribe, GRACE

Remote Automated Coke Cutting DCU

- Andrew Worley, FLOWSERVE

Opportunities and Limitations on Remote and Automatic Coke Cutting DCU

- Dr. Wolfgang Paul, Ruhrpumpen

Mejores Practicas en Paradas de Planta Seguridad y Tiempo FCCU

- Martha Smith, ZymeFlow

Material Testing and Corrosion Experience in Crude Upgrader Atmospheric Distillation Unit FCCU

- Tore Arnesen, PDVSA Intevep & María Specht, PDVSA Intevep & Henry Tovar, PDVSA Intevep & Erik Rodriguez, PDVSA Intevep

Inspecao UT por pig instrumentado em fornos DCU

- Paulo Augusto Martinez, a.hak Industrial Services

FCCU Regenerator Vessel Structural Repair Utilizing Automated Weld Metal Overlay FCCU

- Pedro Amador, AZZ

Incidente Sistema de Decoquizado Complejo Industrial Lujan de Cuyo DCU

- Ing. Armando Atencio, YPF & Ing. Ariel Santiago, YPF

Fatigue Testing of Coke Drum Plates Reinforced With Weld Overlay Summary of Results DCU

- Fábio de Castro Marangone, Petrobras & Ediberto Bastos Tinoco, Petrobras & Julian J. Bedoya, P.E., Stress Engineering Services & Luiz Carlos Largura Jr., Stress Engineering Services

Diseno del catalizador y potencial de la carga dos parametros fundamentales para optimizar una unidad de FCC Uribe Orlicky Grace FCCU FCCU

- Uriel Navarro Uribe, Ph. D., GRACE & Dariusz Orlicky, Ph. D., GRACE

Developments in Catalyst Handling for FCC RFCC Units FCCU

- Johnson Matthey, Johnson Matthey Process Technologies

DeltaValves Retractable Center Feed Injection Device DCU

- Miguel Lopez, DeltaValve

Delayed Coking Operational Optimization DCU

- Jesus R. Cabello, Foster Wheeler

Delayed Coker Coke Drum Top Head Safety DCU

- Mitch Moloney, ExxonMobil

Delayed Coker Coke Drum Bottom Head Safety DCU

- Mitch Moloney, ExxonMobil

Coker Vessel Life Extension Repair Implementation DCU

-   Pedro Amador, AZZ

Coke Drum Monitoring Inspection Assessment and Repair for Service Life Improvement DCU

- Tej Chadda, Foster Wheeler

Bulging Assessment and Long Term Repair of Coke Drums DCU

- Mahmod Samman, Ph.D., P.E., Houston Engineering Solutions & Ediberto B. Tinoco, Petrobras, Brazil & Fábio C. Marangone, Petrobras, Brazil

Automation of Separation for More Bottom of the Barrel Return DCU

- Victor Scalco, GULFTRONIC® SEPARATOR SYSTEMS

The Importance of Standards to the Future of the Hydrocarbon Processing Industry DCU

- Dr. Maurice J. Wilkins, YOKOGAWA & Dr. Graham Bird, YOKOGAWA

FCCU and DCU Safety vs. Cost DCUFCCU

- Neal Cammy, Blac Inc

Effect of Dual-Inlet Feed on the Integrity of Coker-BUD Joint DCU

- Khaled Sadek, Ph.D., P.Eng., Suncor

COKER Safety and Reliability Lessons Learned DCU

- Dale Wilborn, Chevron

Troubleshooting FCCUs Processing LTOs and Unconventional Canadian Crudes FCCU

- Greg Savage, Nalco Champion

More Propylene in Existing FCC Units and Revamps FCCU

- Christopher Dean, High Olefins FCC Technology Services

FCC Special Valves: Best Practices to Increase Performance and Reliability FCCU

- Mauro Natalini, REMOSA

Capturing Maximum Value with Tight Oil Feeds in the FCC FCCU

- Alexis Shackleford, BASF

Improving FCCU Unit Performance FCCU

- Mel Larson, KBC Advanced Technologies & Joni Lipkowitz, KBC Advanced Technologies

Using Petro-Sim to Optimize an FCCU with Integrated Product Separation FCCU

- Greg Tragitt, KBC Advanced Technologies

Reduce Coke Drum Vent Pressure: Report on EPA Standards DCU

- Frank Tracy, Phillips 66

Workgroup FCCU

- Christopher Dean, HIGH Olefins Technology Services LLC

Turnaround Safety DCU

- Raj Sharma

Using Light Straight Run Naphtha, Lighter Crudes or Condensates as Feedstocks FCCU

- Christopher Dean, HIGH Olefins Technology Services LLC

Thermal Transient Analyses of Nominal and Bulged Skirts DCU

- Julian J. Bedoya, P.E., Stress Engineering Services & Sathish Ramamoorthy Ph.D., P.E., Stress Engineering Services

Turnaround Efficiency Safety FCCU

- , AltairStrickland

Stop Plugging Those Coker Lines DCU

- Sean Mathew, CSI

The Largest Coke Drum Bulge Repairs in Industry History DCU

- Amish Jani, Reliance Industries Ltd., Jamnagar & Mahmod Samman, Ph.D., P.E., Houston Engineering Solutions, LLC

Safe Automated Pet Coke Dewatering FCCU

- , General Kinematics

Safe Coker Profitable Coker DCU

- Dhaval Desai, Essar Oil Limited, Refinery Site, 39 KM

Refining Petrochemical Integration A New Paradigm FCCU

- Anil Khatri, GTC Technology

Refinery Challenges Related to Heavy Oils Processing in DCU FCCU FCCU

- Raj Kumar Ghosh, IOCL

Optimization of FCCU Expansion Joint Application System Design and Reliability Considerations FCCU

- Tej Chadda, Foster Wheeler

Naphtha Catalytic Cracking for Propylene Production by FCCU FCCU

- Christopher Dean, HIGH Olefins Technology Services LLC

Mega Cokers Commissioning Experience DCU

- Raj Sharma, Coker Consultant

Managing Weld Stresses for Advantage in Coker Engineered Repairs DCU

- Pedro Amador, AZZ

Industry Leading Coke Drum Unheading and Center Feed Technology DCU

- Elango Narendran, Curtiss Wright

Keys To A Successful Delayed Coking Unit Revamp DCU

- John E. Collins, CB&I & Malay Bagchi, IOCL-Panipat Refinery

Improved Safety Efficiency through Remote and Automated Coke Cutting DCU

- Subramanya Prasad, Flowserve

FCCU and Delayed Coker Safety Vs Cost DCU

- FCCU and Delayed Coker Safety Vs Cost, BLAC

FCC Spent Catalyst Stripper Technology FCCU

- Paul D. Wendt, CB&I

FCC Revamp Solutions FCCU

- Chris Santner, Technip

FCC Revamp Discussion FCCU

- Christopher Dean, HIGH Olefins Technology Services LLC

Enhance Refinery Margins by Producing Premium Refinery Products from FCC Slurry Oil FCCU

- M. O. Garg, Manoj Kumar, CSIR - INDIAN INSTITUTE OF PETROLEUM & Manoj Srivastava, CSIR - INDIAN INSTITUTE OF PETROLEUM

Delayed Coker Coke Drum Valve Operations Integrity DCU

- Mitch Moloney, ExxonMobil

Decoking System Remote Coke Cutting DCU

- Dr. Wolfgang Paul, Ruhrpumpen

DCU and FCCU Turnaround Efficiency and Safety DCU

- Gary Pitman, Coking.com

Coke Drum Structure Safety during Shutdowns Maintenance DCU

- Mitch Moloney, ExxonMobil

Coke Drum Inspection Overview and Management Tools for Coke Drum Economic End of Service Life DCU

- Richard Boswell, Stress Engineering Services

Case Studies of Optimizing and Troubleshooting FCC Reactors and Regenerators FCCU

- Hari Doss, CAEZEN Technologies

Case Studies of Optimizing and Troubleshooting FCC Reactors and Regenerators FCCU

- Hari Doss, CAEZEN Technologies

Closed Coke Slurry System CCS System DCU

- Bernd Lankers, TRIPLAN AG & Josef Wadle, TRIPLAN AG

Best practices to increase productivity and reliability of delayed coker units DCU

- Jesus R. Cabello, Foster Wheeler

Wet Scrubbing Control Technology for FCCUs Particulate SO2 SO3 and NOx Removal in One Process Unit FCCU

- Garrett Billemeyer, Belco Technologies Corp.

Unexpected Hazard of Switching into a Close Drum Isolation Valve DCU

- Mike Kimbrell, bp

Safe Automated Pet Coke Dewatering DCU

- , General Kinematics

Repair and Retrofit of a Coke Drum Skirt Attachment Weld DCU

- Mike Schmidt, CHS Inc & Mahmod Samman, Ph.D., P.E., Houston Engineering Solutions

Remaining Life Assessment of Coker Heater Tubes DCU

- Arun Sreeranganathan, Ph.D., P.E. May 6-, Stress Engineering Services

Remote Coke Cutting Review DCU

- Thomas Meek, Shell Global Solutions

Management Tools for Coke Drum Economic End of Service Life DCU

- Richard Boswell, P.E., Stress Engineering Services

Maximizing Refining Value With Abundant Shale Oil DCU

- Mel Larson, KBC

Lessons Learned After Opening a Top Slide Valve on a Live Coke Drum DCU

- Reno Laseur, Canadian Natural

FCC Benchmarking Exploring Industry Trends and Creating Paths Forward FCCU

- Alexis Shackleford, BASF

Diesel Creation in the FCC Centered Refinery FCCU

- Phillip K. Niccum, Kellogg Brown & Root

Bulging Assessment of Coke Drums DCU

- Mahmod Samman, Ph.D., P.E., Houston Engineering Solutions & Ediberto B. Tinoco, Petrobras, Brazil & Fábio C. Marangone, Petrobras, Brazil & Hezio R. Silva, Petrobras, Brazil

Are Machines Better Than Humans in a Crisis FCCU

- Dr. Maurice J. Wilkins, YOKOGAWA

Delayed Coker Safe Sampling Tar or Spalled Coke DCU

- Mitch Moloney, ExxonMobil

Coker Heater Optimization and Heater Fouling DCU

- , KBC

Case Studies of Optimizing and Troubleshooting FCC Reactors and Regenerators FCCU

- , CPFD (Computational Particle Fluid Dynamics)

Safety Confined Spaces DCU

- , Z Systems

Safe Automated Pet Coke Dewatering DCU

- Oscar Mathis, General Kinematics

Repair and Retrofit of a Coke Drum Skirt Attachment Weld DCU

- Mike Schmidt, CHS Inc & Mahmod Samman, Ph.D., P.E., Houston Engineering Solutions, LLC

Remote Automated Coke Cutting DCU

- Andrew Worley, Flowserve

Remaining Life Assessment of Coker Heater Tubes DCU

- Arun Sreeranganathan, Ph.D., P.E., Stress Engineering Services

Reliability of Drills and Drill Stems DCU

- Al Kaye, Integrity Engineer

Impact of Feed Properties and Operating Parameters on Delayed Coker Petcoke Quality DCU

- Robert (Bob) Clarke, Foster Wheeler

Delayed Coking Process Design Operations and Optimization DCU

- , KBC

Coker Fractionator Project Review Driving Safety and Integrity with Analytical Sophistication DCU

- Jack Brownlee, Aquilex WSI Canada

Coke drum Monitoring Inspection for Fatigue Life and Safety Improvement DCU

- Amish B. Jani, Reliance & Tej Chadda, Foster Wheeler

Coke Drum Life Extension Issues and Solutions for Inlet Nozzle Problems DCU

- Richard Boswell, P.E., Stress Engineering Services

Delayed Coker Coke Drum Valve Operations Integrity DCU

- Mitch Moloney, ExxonMobil

Coking Safety Reliability DCU

- Matty Zadnikar, Z GROUP

Coke Drum Improvements Real World Reliability DCU

- Brian Doerksen, BECHTEL

Coke Drum Engineering Manufacturing Challenges DCU

- Hari Ravindran, Larsen & Toubro

Closed Coke Slurry System CCS System DCU

- Bernd Lankers, TRIPLAN & Josef Wadle, TRIPLAN

Alternatives to Rare Earth Commercial Evaluation of REpLaCeR FCC Catalysts at Montana Refining Company FCCU

- Ann Benoit, W.R. Grace & Co & Ron Colwell, Montana Refining Company & Doug Jergenson, Montana Refining Company & Sudhakar Jale, W.R. Grace & Co & Emery Udvari, W.R. Grace & Co & David Hunt, W.R. Grace & Co

A Fresh Look at 3 Drum Cokers DCU

- Kenneth Kirkpatrick, FLUOR & Barry Millet, FLUOR

Thoughts on Workplace Safety FCCU

- Dan Harris, Western Refining

Thermal Kinetics Dynamics in Delayed Cokers DCU

- , KBC

Reliability of Drills and Drill Stems DCU

- Al Kaye

Operator Shift Log Project DCU

- Kim Phillips, IRVING

Managing FCC Reliability and Run Lengths FCCU

- , Astron International

Overcoming Chloride fouling problems in FCC Fractionators FCCU

- Matt Meyers, WNR

Improving Light FCC Product Recovery FCCU

- Eric R Hutchins, Process Consulting Services

FusionStell Cladding DCU

- Daniel De Wet, Deloro Stellite & Louw De Jong, Deloro Stellite

FCC Feed Injection Technology FCCU

- Paul D. Wendt, Lummus Technology

FCC Catalyst Logistical Management FCCU

- Mike Hurley, Equilibrium Catalyst

Development of CIAs Remote Robotic Crack Detection Service DCU

- Jacqueline Cameron, CIA Inspection & Les Harold, CIA Inspection

Delayed Coker Cutting Derrick Collapse DCU

- Mitch Moloney, ExxonMobil

Waveinjector Technology for Use in Refinery Coking Applications DCU

- Peter Baldwin,, FLEXIM GmbH & Dr. Mathias Panicke, FLEXIM GmbH & Stefan Kranz, FLEXIM GmbH & Nik Martinov, FLEXIM GmbH & Gerhard Grabmeier, FLEXIM GmbH

Successful Commercialisation of Zero Low Rare Earth FCC Catalysts FCCU

- Colin Baillie, GRACE

Online Non intrusive Trouble Shooting and Process Characterization of FCCUs using Gamma Ray and Tracer Technology FCCU

- Lee Robins, Tracerco & Andrew Shaw, Tracerco

Norms and Standards for sizing and calculation of a Coke Cutting System DCU

- Dr. Wolfgang Paul, RUHRPUMPEN GmbH

Multi Stage Reaction Catalysts A Breakthrough in FCC Catalyst Technology FCCU

- Stefano Riva, BASF

High Rare Earths Prices Options for Reducing FCC Catalyst Costs FCCU

- Ray Fletcher, INTERCAT

FCCU NO Reduction SCR Retrofit DCUFCCU

- Daniel Barnett, KTI Corporation

FCCU and Delayed Coker Safety Vs Cost FCCU

- Phillip B. Black, blac Inc.

Delayed Coker Cutting Derrick Collapse DCU

- Mitch Moloney, ExxonMobil

Debottlenecking HCGO Filtration DCU

- Niels van der Horst, DAHLMAN

Cost Effective Solutions For The Efficient Decontamination Of a Coker Unit DCU

- Paul Komperda, ZymeFlow

Computational Fluid Dynamics CFD An Effective Tool for FCC Design Improvement and Troubleshooting FCCU

- David Chaplin, Shaw

Coke Drum Repair DCU

- Cyril NARJOZ, aquilex Welding Services B.V. & Pedro AMADOR, aquilex Welding Services B.V.

Coking CatCracking Conference DCUFCCU

- Matty Zadnikar, Z GROUP

Closed Coke Slurry System DCU

- Bernd Lankers, TriPlan & Josef Wadle, TriPlan

Barriers to Superior FCC Cyclone Performance FCCU

- Ziad Jawad, EMTROL

Advantages of Photogrammetry for Dimensional Control of Coke Drums and Other Large Vessels DCU

- JULIO ABLANEDO (FCP), Felguera Calereria Pesada (FCP) & ANTONIO PEREZ (METRIA), Felguera Calereria Pesada (FCP)

ADCV Decoking Control Valve DCU

- Ihab Botros, Flowserve

Twenty Questions Identify Probable Cause of High FCC Catalyst Loss FCCU

- Phillip K. Niccum, Kellogg Brown & Root (KBR) & Steve Tragesser, Kellogg Brown & Root (KBR)

The Easiest Way to Look at the Progress of Your Project FCCU

- Whitney Childress, Industrial Progress Viewer

Reliability Results of BOC Valve Installation at Valero Texas City Refinery DCU

- Roland Vasquez, VALERO

Preventing the Most Common Environmental Excursions on the FCC FCCU

- Ray Fletcher, INTERCAT & Martin Evans, INTERCAT

Population Balance Modeling A Useful Approach for Understanding FCC Particulate Attrition FCCU

- Jennifer Wade, BASF & David Stockwell, BASF & Robert Andrews, BASF & S. B. Reddy Karri, PSRI & Yeook Arrington, PSRI & Ray Cocco, PSRI

Optimizing Operations in a High Rare Earth Cost World FCCU

- Rosann Schiller, GRACE

New Antifoam Reduces Silicone Carryover DCU

- Bruce Wright, Baker Hughes

Increasing FCC Efficiency with Information Gathered by Radioisotope Technology FCCU

- Dave Ferguson, Tracerco

In Refractory Linings Its Whats Inside That Counts FCCU

- Robert J. Jenkins, Robert J. Jenkins & Co.

Ground Penetrating Radar Technology and Its Use in Delayed Coking Units DCU

- , Structural Preservation Systems & , Strong Point Engineering

FCC Emergency Interlock System Application FCCU

- Lewis Pettengill, UOP

Evaluating the Right Elevator Solution for Coker Cat Cracker Operations DCU

- Gil Prado, Century Elevators

Dealing w Hexavalent Chromium in FCCU Refractory Repairs During Turnarounds FCCU

- , Structural Preservation Services

Coking Fines Handling System DCU

- Craig Hofmeister, Merpro Americas

Thermal Distributions are not the Full Picture or Three Sides to Every Story DCU

- Lisa Ely, Stress Engineering Services

Sulphur Petroleum Coke Markets More important than you might think DCU

- , MARSULEX

Sulfur Tail Gas Thermal Oxidizer Systems DCU

- Peter Pickard, Callidus Technologies

Stop Plugging Those Coker Lines DCU

- Jim Hartman, CSI

Safe Mechanical Alternative DCU

- , Scorpion Oil Tools

Reliability Centered Maintenance Model for Coker and Sulphur Handling Systems DCU

- Dave Rosenthal, MARSULEX & Richard Spracklin, MARSULEX

Mythbusters Steam Heating System Design DCU

- Jim Hartman, CSI

Innovation in Control System Design for Coke Drum Switching DCU

- Prem Manohar, BANTREL

Flexible Aerogel Insulation for Coker and Sulfur Unit Applications DCU

- John Williams, Aspen Aerogels & Trevor Seipp, Becht Engineering

Factors to be considered in design of H2S Abatement Unit in LNG Project DCU

- Surya Armansyah, PERTAMINA