Home › Forums › CatCracking › FCC Operations › Tapco valve
This topic contains 11 replies, has 1 voice, and was last updated by Anonymous 9 years, 3 months ago.
-
AuthorPosts
-
July 28, 2007 at 6:06 am #3976
AnonymousThere is a slide valve at Expander inlet, at one icident it got closed by itself to 26 % opening from 40 % opening without any command from DCS. The Tapco valve can be operated through joystick / handwheel. But is is confirmed no operation was being done on the valve as checked from DCS history of operator action. Is it possibel that avlve closes on its own because of mechanical/ inst reasons. Valve was in Remote mode ie from DC operation.
-
August 2, 2007 at 6:19 am #7335
AnonymousCheck your hydraulic oil cylinder. A typical response time for a slide valve on a conventional hydraulic oil operation would be fully open to fully close in 30 seconds maximum. Maybe you have had a suddenly failure on your hydraulic cylinder.
regards
luismarques
-
August 2, 2007 at 11:55 pm #7334
AnonymousThanks Sir,
Actually PRT had tripped due to over motroing requirement as expander valve partially closed suddenly. But while startup operation was found to be OK . Would filure on hydraulic cyclinder beocme normal on its own. -
December 6, 2007 at 3:39 am #7143
AnonymousDear sir,
We , Samsung Everland Inc Korea, are want get your quotation for the Valves as well as getting your technical services in Korea Plant site,
Please let us know your contact point or let us know your korean agent details by return.
Furthermore details will be followed upon receit of your reply.
Thank you and reagrds,
K.Kim/Samsung Everland
Tel:+82-2-759-1678
e-mail:keaum.kim@samsung.com
-
February 1, 2008 at 10:45 am #7074
AnonymousWho know the email address of TAPCO VALVE? Please let me know.
my eamil address:erayking@verizon.com -
February 27, 2008 at 9:18 pm #7013
AnonymousTapco phone is 281-247-8100
-
April 14, 2009 at 4:55 pm #6156
AnonymousIf it was sudden loss, I would look at what was happen in you hydraulic system… e.g. was there proper level resivour or was it low enough to suck a pocket of air? Also has there been any issue with water in the hydraulic oil reservoir? it is incredible how a little water or air pocket will make the cylinder react. Also check for a blown line some where or maybe it was cold and cause the oil to get too viscuos before the pump? was there any other valve reactions (even minor ones)? has there been any issue of the valve hydrualics leaking (operators needing to ‘bump check’)? Also how did you double check how quickly it closed? expander inlet temps, pressure of your seperate/ regenerator?
I realize that there always needs to be a reason when the train trips but if the valve is working fine now…. You might need to get more information from your operators about what happend then the actual valve company.
STFB
Great lakes region, USPS hydrualic cylinder failure would not become normal on its own
-
September 24, 2009 at 10:16 am #5988
AnonymousA similair incident happen to our FCCU slide valve, as it to was moving around on its own due to a Servo Valve Filter pluggage, the only way around it is to go on manual handwheel till Maint repairs
-
October 18, 2013 at 1:57 pm #4418
AnonymousDear Sir,
Our organisation is in the process of procuring FCCU REACTOR PLUG VALVE from your company.
We would appreciate if you could send us your best price of this item.
NOTE that all prices should be on C&F Apapa sea port, Lagos Nigeria.However, the FOB and Total CFR value of items should be clearly stated. Country of Origin of goods and Country of Supply should also be stated.
The proforma invoice (PFI) should be addressed as follows:Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
PMB 2252
Kaduna, Nigeria.
The PFI should be sent DIRECTLY to the undersigned.Please NOTE that full specifications of the materials should be included on the proforma invoice. All the Manufacturers Quality Certificate should be attached.
Looking forward to your prompt response please.
ENGR. B.A. BAFRED
FOR:- Managing Director, KRPC
——————————————————————————–
AROKOYO, S.P. (Contact Person)
FOR:- MARKET RESEARCH Officer
Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
Procurement Department
PMB 2252
Kaduna, NIGERIA
Tel: +234-(0)62-516146 or +234-(0)62-513869
Fax: +234-(0)62-517200 or +234-(0)62-517438
+234-(0)62-514382 or +234-(0)62-515697
Website:
E-mail-1:
E-mail-2 -
October 18, 2013 at 1:58 pm #4417
AnonymousDear Sir,
Our organisation is in the process of procuring FCCU REACTOR PLUG VALVE from your company.
We would appreciate if you could send us your best price of this item.
NOTE that all prices should be on C&F Apapa sea port, Lagos Nigeria.However, the FOB and Total CFR value of items should be clearly stated. Country of Origin of goods and Country of Supply should also be stated.
The proforma invoice (PFI) should be addressed as follows:Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
PMB 2252
Kaduna, Nigeria.
The PFI should be sent DIRECTLY to the undersigned.Please NOTE that full specifications of the materials should be included on the proforma invoice. All the Manufacturers Quality Certificate should be attached.
Looking forward to your prompt response please.
ENGR. B.A. BAFRED
FOR:- Managing Director, KRPC
——————————————————————————–
AROKOYO, S.P. (Contact Person)
FOR:- MARKET RESEARCH Officer
Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
Procurement Department
PMB 2252
Kaduna, NIGERIA
Tel: +234-(0)62-516146 or +234-(0)62-513869
Fax: +234-(0)62-517200 or +234-(0)62-517438
+234-(0)62-514382 or +234-(0)62-515697
Website:
E-mail-1:
E-mail-2 -
October 18, 2013 at 2:16 pm #4416
AnonymousDear Sir,
Our organisation is in the process of procuring FCCU REACTOR PLUG VALVE from your company.
We would appreciate if you could send us your best price of this item.
NOTE that all prices should be on C&F Apapa sea port, Lagos Nigeria.However, the FOB and Total CFR value of items should be clearly stated. Country of Origin of goods and Country of Supply should also be stated.
The proforma invoice (PFI) should be addressed as follows:Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
PMB 2252
Kaduna, Nigeria.
The PFI should be sent DIRECTLY to the undersigned.Please NOTE that full specifications of the materials should be included on the proforma invoice. All the Manufacturers Quality Certificate should be attached.
Looking forward to your prompt response please.
ENGR. B.A. BAFRED
FOR:- Managing Director, KRPC
——————————————————————————–
AROKOYO, S.P. (Contact Person)
FOR:- MARKET RESEARCH Officer
Kaduna Refining & Petrochemical Company (KRPC)
KM16 Kachia Road
Procurement Department
PMB 2252
Kaduna, NIGERIA
Tel: +234-(0)62-516146 or +234-(0)62-513869
Fax: +234-(0)62-517200 or +234-(0)62-517438
+234-(0)62-514382 or +234-(0)62-515697
Website:
E-mail-1:
E-mail-2 -
October 23, 2013 at 5:32 am #4415
AnonymousPlease I made an enuiry for FCC REACTOR PLUG VALVE on the 18/10/2013, kindly respon to my request.
Best regards.
Arokoyo S.P.
+234(0)8028412231 -
AuthorPosts
You must be logged in to reply to this topic.