Refining Community Logo

High sulphur in LPG

Home Forums Sulfur Amine High sulphur in LPG

This topic contains 1 reply, has 2 voices, and was last updated by  virurocks3 5 years, 4 months ago.

  • Author
  • #2011

    Freddy Martinez

    My question is related with high sulphur content in LPG from crude distillation.
    In one of our refineries we have detected high sulphur content in LPG from crude distillation. The scheme is as follows: Crude distillation – Gas concentration unit – Debutanizer – Amine absorber – Merox extractive. The high S content is mainly due to high dimethylsulphide (DMS) and dimethyldisulphide (DMDS). We measure high DMS and DMDS both at the entry and outlet of the amine absorber and LPG Merox. We have also seen some unexpected behaviour with these species: DMDS increase trhough the amine plant (DMDS higher in the oulet than in the inlet) and decrease in the Merox unit. The same with DMS. But sometimes we have also observe taht DMDS decrease in the amine plant (??)
    My questions are:
    – What could be the origin of DMS and DMDS (synthetic / heavy crudes, slops processing…)?.
    DMDS could be re-entry suphur in Merox, but we have observe it in the inlet of amines and Merox (It seems that both compounds come with the crude)
    – Could be DMDS come from oxidation of methylmercaptan in the topping, Gascon or amines (where there is not Merox catalyst) if oxygen is present in the LPG?
    – If DMDS is in the crude, according to its boiling point it should end in the heavy light / heavy naphtha. Has anyone observe high DMDS in LPG in his refinery?
    – Could DMS and DMDS increase or decrease in the amine plant or Merox? (I do not think so). Are these compunds partially soluble in NaOH or could be removed in the sand filter?
    – DMDS could also come from the circulating NaOH in Merox plant, if quality is not good (high concentratrion of disulphide in NaOH)? What is the normal or recomended concentration of disulphides in regenerated NaOH?
    – What could be the alternatives to remove these compounds? I expect that nothing can be done in amine / Merox, these compounds are not reactive
    Appreciate your help in this issue

  • #27459


    We are facing the same problem here in our refinery with respect to high sulfur in FCC LPG. These high sulfur peaks appear suddenly amd mostly observed after amine wash. We area also unable identify the source. We are processing highb sulfur crudes like basrah light, KEC, Iran Mix

You must be logged in to reply to this topic.

Refining Community